SCRAP metal shredder manufacturer

Scrap metal shredders can process a variety of materials, including aluminum cans, steel containers, lids, metal packaging, scrap metal, vehicle parts, and more.

Scrap metal shredder provides assistance for scrap metal recycling. Scrap metal shredder can be used as aluminum can shredder, metal barrel shredder, aluminum shredding machine, steel drum shredder, tin shredder, etc.

lt can handle small or large, regular or irregular metal waste. It can process metal waste as small as beverage cans, mobile phone casings, wires and cables, etc., to large waste oil barrels, automobile body parts, etc.

A scrap metal shredder machine uses rotating cutting blades mounted on dual shafts to tear and cut metal materials into smaller pieces. These pieces are then easier to handle, transport, and recycle.

Volume Reduction: Significantly reduces the size of metal waste.

Recycling Efficiency: Prepares materials for efficient recycling.

Cost Savings: Reduces disposal costs and can generate revenue from recyclable materials.

Environmental Impact: Supports sustainable waste management practices.

Scrap metal shredders come in various sizes, from small, portable units for light-duty applications to large, industrial models for heavy-duty shredding.

Our scrap metal shredder operates on the principle of shearing and tearing, which results in very low working noise. In fact, the noise produced by some of our smaller, lighter shredders when idling is comparable to that of a normal conversation.

Regular maintenance includes lubricating moving parts, checking and replacing worn blades, inspecting the motor and gearbox, and ensuring that all safety features are functioning properly.

Yes, many metal shredders are capable of processing mixed materials, but it’s important to check the specific model’s capabilities and adjust settings as needed.

Metal shredders are designed with safety features such as emergency stop buttons, safety guards, and automatic shut-off systems to ensure safe operation. However, operators should always follow the manufacturer’s safety guidelines.

The output size can vary depending on the shredder’s design and settings. Some models allow you to adjust the output size to meet specific requirements.

While designed for metals, some metal shredders can also process certain non-metal materials like plastics or wood. 

Consider the type and volume of materials you need to process, the desired output size, the shredder’s capacity, energy consumption, noise levels, and ease of maintenance.

Modern metal shredders are designed to be energy-efficient, often incorporating advanced technologies to reduce power consumption while maintaining high performance.

Our machines have a one-year warranty. Customers can contact us at any time if they have any questions and we will solve them for you as quickly as possible.

Yes, we can customize the shredder according to the type of items you want to shred, production capacity, output size, and usage scenarios. In addition, we can also match it with conveyors, spray systems, dust removal systems, etc.

The scrap metal market is huge, producing millions of tons of scrap metal every year. With the increasing awareness of sustainable development, the threat of resource scarcity, the support of government policies and the development of new technologies, scrap metal recycling will continue to become an important economic and environmental field. It helps to reduce resource waste, reduce environmental pollution, create jobs and promote a circular economy, while providing a sustainable supply of metals.

The application of scrap metal shredders is mainly in the field of non-ferrous metals. Let’s take a brief look at non-ferrous metals and discuss the applications of metal shredders.

Application of scrap metal shredder in the field of non-ferrous metals

Nonferrous metals are types of metals other than ferrous metals (which generally have higher strength and greater hardness).

Nonferrous metals are widely used in machining and structural materials.

Aluminum, for example, is lightweight and corrosion-resistant and is commonly used in structural components, aircraft parts and machining applications. Brass is valued for its durability and corrosion resistance. It is often used for the processing of accessories and decorative elements. Bronze is an alloy of copper and tin, known for its strength and corrosion resistance. It is used in the manufacture of bearings, gears and various structural components.

Non-ferrous metals are also widely used in the manufacture of electronic components, electrical equipment, etc. For example, copper is the primary material for electronic cables, electrical connectors, and printed circuit boards. Aluminum and its alloys can be used to produce mobile phone casings, electronic radiators, etc. Additionally, tin is used as a solder in electronic soldering.

Metal shredder solves the problem of non-ferrous metal processing

Non-ferrous metals have various types and applications. How to handle and manage different non-ferrous metal wastes has become a problem for some recycling centers. This also makes scrap metal crushers play a key role in the recycling process. Scrap metal shredder can be used as brass shredder, aluminum shredder, tin shredder, copper shredder etc. By breaking down these materials into manageable sizes and facilitating the extraction of valuable metals, these shredders make a significant contribution to the circular economy.

Common nonferrous metal scraps

As can be seen from the above, the common metal scraps that can be shredded by metal shredders are:

• Building materials: roof metal panels, siding panels, metal pipes (such as copper pipes), etc.
• Auto parts: engine block, exhaust pipe, frame, etc.
• Electrical equipment: wires and cables, printed circuit boards, aluminum radiators, metal casings of electronic equipment, etc.
• Other metal scraps: waste oil barrels, metal shavings, cans, bullets, etc.

Shredding metal waste not only helps to reduce the size of the metal waste, but also helps to effectively separate the metal from other materials present in the waste, such as rubber, plastic, etc., making the recycling efficiency of metals such as steel, aluminum and copper greatly improved.

Traditional metal recycling uses shears to cut metal. This method is very slow and time-consuming, so using a shredder to shred metal can improve recycling efficiency.

1. The metal shredder has strong processing capabilities: The metal shredder has high-intensity processing capabilities. It can quickly process large amounts of scrap metal materials, such as scrap cars, steel bars, scrap aluminum, stainless steel, etc.

2. Improve melting efficiency: The scrap metal shredder can shred scrap metal into smaller pieces, making it easier to melt and separate.

3. High-quality steel: In order to ensure the excellent performance of the double-shaft shredder blades, we specially choose high-strength alloy steel to make them. These steels, including China’s H13, Germany’s DILLIDUR 550 and Sweden’s HARDOX 550, are known for their excellent hardness, wear resistance and impact resistance. 

By using these high-quality steel materials, we can effectively avoid problems such as chipping and dulling of the blades, thereby greatly extending the service life of the dual-shaft shredder blades. This means you can change tools less frequently, increase productivity, and reduce maintenance costs. 

In short, choosing blades made of these high-strength alloy steels will not only ensure the stable operation of the shredder, but also bring you higher cost performance and long-term economic benefits.

4. Our twin-shaft scrap metal shredder stands out for its low noise, high torque and low rotational speed. This machine has huge torque, making it capable of shredding various difficult-to-scrap metals with ease. 

The low-noise design allows operators to work in a quiet and comfortable environment, reducing fatigue and stress. At the same time, low-speed operation not only reduces the wear and tear of the equipment, but also reduces the generation of dust, further ensuring the cleanliness of the working environment and the health of workers.

5. We always firmly believe that every customer’s needs are unique, so we are committed to providing customized system solutions to meet the needs of different customers. 

Our service team will gain an in-depth understanding of your specific needs to provide you with the most suitable scrap metal shredder configuration and blade selection. and other configurations such as conveyors, magnetic separators, etc.

After the metal waste is shredded, it is processed and put back into use. Some metal waste is melted down and reshaped for reuse, and some metal waste is used directly into building materials or other materials, such as concrete or asphalt, to improve their strength and durability. Here are a few common uses for metal scraps:

1. Shredded metal, especially steel and aluminum, can be used in the production of building materials. It may aid in the fabrication of steel bars, structural components, or other metal building materials.
2. Recycled metal can be used to produce a variety of automotive components, including body panels, chassis components, and other structural elements.
3. Certain metals recovered from e-waste shredding, such as copper, can be used to make new electronic components, cables and printed circuit boards.
4. Shredded metal can be used in the construction and maintenance of infrastructure projects. This includes bridges, roads and other civil engineering applications.
5. Metal fragments can be used in the production of various consumer goods, such as appliances, furniture and packaging materials.

1. First of all, the rugged and efficient scrap metal shredder is an important reason why customers like it
2. Shengzhong continuous investment in research and development, so that we have a lot of advanced patented technology, and Shengzhong company constantly upgrade products, make products more reliable
3. The scrap metal shredder is safe and stable, the whole machine meets the CE standard, has an intelligent PLC system,
4. More options, a variety of different products to meet customer requirements for shredding