Korean 
English 
Russian 
Thai 
Chinese 
Japanese 
Vietnamese 
Malay 
Tamil 
Turkish 
Arabic 
Portuguese 
Indonesian 
French 
Spanish Plastic shredding is a crucial process in modern recycling and waste management, enabling large plastic items and scrap materials to be reduced into smaller pieces for washing, sorting, and pelletizing in downstream recycling stages. This comprehensive guide explains the step-by-step process for shredding plastic, key types of plastic shredding machines, and the critical technical considerations for different plastic properties, etc.
What Machines are Used to Shred Plastic?
- Description: Two counter-rotating shafts with intermeshing cutters that shear and tear material.
- 최상의 대상: Large volumes and bulky items (big bins, drums, plastics with some contamination).
- Pros: High throughput, robust, less likely to clog with bulky feed.
- Shengzhong example: 22~70kw-110~320kW, blade Ø 230–700 mm.
- Description: Four shafts (two pairs) provide staged cutting/shearing, often with screens for size control.
- 최상의 대상:Tough, bulky, irregular items (auto parts, e-waste housings) where anti-jam and finer control are needed.
- Pros:Higher capacity, better anti-jam, finer and more consistent output when used with screens.
- Shengzhong example:motor15+15kw-2*30+2*55kw,Cutter chamber600*800–1600*2000
- Description:One rotating shaft with mounted blades cutting against a fixed counterknife or screen.
- 최상의 대상:Bottles, containers, ductile or semi-rigid parts, and general mixed plastic waste.
- Pros: Good uniform particle size, relatively low dust, easier maintenance.
- Shengzhong example: 22–132 kW motor, cutting width 600–1800 mm.
- Description: Scaled down twin-shaft models for light-duty use.
- 최상의 대상: Small businesses, workshops, community recycling, low-volume streams.
- Shengzhong example: 4–15 kW, blade Ø 160–230 mm.
- Description: Rotor with fixed knives that crush/break brittle parts into pieces.
- 최상의 대상:Brittle plastics, thick-walled parts (e.g., ABS housings), and as a stage before granulation.
- Shengzhong example: 3–37 kW, mesh size 6–50 mm, imported material size110*180-1000*610mm.
Granulators (high-speed and low-speed)
- Description:High-speed rotor with knives that cut plastic into flakes/granules; low-speed versions have larger rotors and high torque.
- High-speed:good for clean sprues, runners, rigid parts — produces fine, uniform flakes.
- Low-speed (shear granulators): better for contaminated, flexible, or braided materials — more torque, less dust, often used after a coarse shredder.
How To Shred Plastic?
Step 1: Plan and identify the material
Before you touch any equipment, identify what types of plastic you’ll be shredding (e.g., PET, HDPE, PP, PVC, film, rigid parts). Different polymers, filled or contaminated materials, and mixed-color streams behave differently in shredders and downstream processes, so decide whether you’ll process a single polymer stream or a mixed stream and choose equipment and post-processing steps accordingly.
Step 2: Safety and preparation
Set up a safe work area with good ventilation and clear emergency stops. Equip operators with PPE — safety glasses or face shield, hearing protection, cut-resistant gloves, steel-toe boots, and tight-fitting clothing. Make sure electrical systems are properly grounded, guards and interlocks on machines are functional, and staff are trained on lockout/tagout and emergency procedures.
Step 3: Sorting and contaminant removal
Manually or mechanically sort incoming material to remove large non-plastic items (wood, metal, electronics), obvious contaminants (dirt, stones), and prohibited items. For higher-value recycling, separate polymers and colors; for mixed recycling you can accept blends but expect lower-quality output. Use magnets and manual inspection to extract ferrous metals before shredding.
Step 4: Pre-processing (de-baling, de-stuffing, and pre-cutting)
If you receive bales, bulky parts, or long sheets/films, pre-break or pre-cut them into manageable pieces so the shredder feed is consistent. This can be done with bale breakers, shears, knives, or even a utility saw for oversized items — consistent feed size reduces jams and improves shredder throughput.
Step 5: Primary shredding
Feed the prepared material into a primary shredder (single-shaft, twin-shaft, or granulator depending on throughput and material) to reduce large pieces into coarse flakes or chips. Operate at the manufacturer’s recommended rotor speed and knife configuration, monitor torque/current to avoid overloading, and use screens or adjustable gaps to control initial particle size.
Step 6: Screening and tramp removal
After primary shredding, pass material over screens or vibratory sifters to separate undersized fines and oversized lumps. Use magnetic separators for ferrous removal and eddy-current separators if non-ferrous metals (aluminum, copper) are a concern. Remove any remaining non-plastics before secondary reduction to protect downstream blades.
Step 7: Secondary size reduction (granulation/four shaft shredder)
Send the screened, contaminant-free material into a granulator or fine shredder to achieve the target particle size — commonly flakes or granules suitable for washing, extrusion, or pelletizing. Adjust rotor knives and screens to get consistent granulate size; adequate cooling or intermittent feed may be needed to prevent melting from friction on heat-sensitive plastics.
Key plastic properties and their shredding implications
Hardness / stiffness (rigid vs flexible): Rigid/crystal line plastics (PET, ABS, PVC sheet) shear well with high-speed granulators or robust rotor-stator knives.Flexible/elastic plastics (LDPE film, flexible PVC, TPE) tend to wrap, stretch, and clog—they need low-speed, high-torque cutters with anti-wrap features or special film shredders.
Toughness / impact strength: Tough, ductile materials (HDPE, PP, some nylons) require high torque and larger tooth pitch to bite and tear; blades must resist bending and bluntness.
Brittleness: Brittle plastics (PS, some filled PVC, rigid foams when cold) fragment easily — high-speed impact or hammer/knife granulators work well and generate fewer wraps.
Melting temperature / thermal sensitivity: Low-melting plastics (some PE grades, waxy bio-polymers) can smear and clog if shredding heats the material. Use low-speed, high-torque cutting (less friction) or intermittent feeding and consider cooling.
Elasticity / elongation at break: High-elasticity materials (TPE, rubber) stretch instead of cut — cryogenic embrittlement or slow, powerful shearing with anti-wrap geometry is often required.
Fillers / abrasives (glass fiber, minerals, carbon black): Filled plastics rapidly wear blades. Choose hardened tool steels, tungsten-carbide edges, replaceable knife inserts and hardened wear plates.
Thickness & wall geometry (thin films vs thick bottles): Thin films require cutting geometries that prevent wrapping (e.g., combed rotor, larger knife spacing). Thick-walled parts need stronger bite and more torque.
Contamination / stickiness (adhesives, labels, food residues): Sticky or wet material gums up knives—coated blades, larger clearances, or pre-cleaning help. Cryogenic processing can also reduce stickiness.
Part shape & feed form (whole bottles, long tubes, sheets): Long or tubular parts may need pre-shearing or infeed guides; extruded profiles may require sectional cutting knives.
Quick reference: common plastics → preferred shredding approach
| Plastic Waste Types | Typical properties | Recommended blade/machine type |
| PET (bottles) | Rigid, crystalline, moderate toughness | Medium-speed granulator or single-shaft shredder with sharp shear knives; hardened blades; good cooling |
| HDPE (containers, drums) | Tough, ductile | Low-speed, high-torque single/double-shaft shredder; large tooth pitch; wear-resistant knives |
| LDPE / film (bags, film) | Very flexible, elastic, wraps easily | Dedicated film/stripper shredder or flake washer pre-shredder; anti-wrap rotor, special tooth geometry; low RPM |
| PP (containers, food tubs) | Tough, semi-rigid | Similar to HDPE — robust shear knives, moderate speed |
| PVC (rigid pipe/sheet) | Rigid, may contain fillers/plasticizers | Granulator with corrosion-resistant/hardened blades; consider extraction of chlorine if thermal processing later |
| PS (rigid/brittle) | Brittle, low toughness | High-speed granulator or impact mill; less risk of wrapping |
| ABS | Tough, impact resistant | High-torque shear/granulator; sharp blades, hardened steel |
| Nylon (PA) | Tough, abrasive if filled, hygroscopic | High-torque shredder; hardened blades, monitor moisture if downstream processing needs dryness |
| Glass-filled plastics | Very abrasive | Tungsten carbide tips or replaceable carbide inserts, hardened wear plates |
| TPE/TPU, rubber | Elastic, gummy | Cryogenic embrittlement + granulation, or very robust low-speed shredders with anti-wrap features |
| Foam (PU, PE foam) | Lightweight, compressible | Foam grinder/compressor then cutter; special foam knives to reduce dust and rebound |
Blade geometry & material considerations
Blade geometry
Shear/rotor-stator knives— great for rigid to semi-rigid plastics producing regular flakes.
Serrated teeth— improve bite on thick/tough parts but can increase wear.
Smooth scissors— good for clean cuts on bottles and sheet, less for film.
Wide-tooth, high-clearance rotors — for films and rubber to avoid wrapping.
Blade materials / hardfacing
Use alloy tool steels heat-treated for toughness and hardness. For abrasive feedstocks, consider tungsten-carbide tips or weld-on hardfacing.
Replaceable segments or reversible knives reduce downtime and cost.
Clearance & tolerances
Knife-to-counter knife gap controls shear quality. Tighter gaps = cleaner cut but higher risk of jamming with contaminated or thick parts.
Rotor speed & torque
Low RPM + high torque reduces wrapping, heating and fines — ideal for ductile plastics and mixed bulky waste.
Higher RPM for brittle plastics to create consistent granules.
Operational & process considerations
Screen size / reduction ratio — final particle size depends on screen; choose screen and knife combos for desired flake size for washing or reprocessing.
Pre-sorting / contaminant removal — metal, stones, wood drastically affect blade life and risk damage; remove before shredding.
Cooling / ventilation — necessary for low-melting plastics to avoid smearing.
Cryogenic processing — use liquid nitrogen to embrittle very elastic materials (TPE, rubber) before size reduction.
Maintenance strategy — modular blades, quick-change holders, spares, and scheduled inspections for abrasive or filled plastics.
Safety & dust control — fine particles from brittle plastics may be combustible; use extraction and monitoring where appropriate.
Practical checklist
- Identify feed: polymer type(s), form (film, bottles, lumps), presence of fillers/contaminants.
- If films or elastic materials dominate → choose anti-wrap, low-RPM high-torque shredder or consider cryogenic.
- If rigid, brittle parts dominate → granulator/impact mill with hardened knives and suitable screen.
- For glass/mineral filled plastics → specify carbide tips or hardened knives and wear plates.
- Check expected throughput and motor torque — tough plastics need more torque than brittle ones.
- Plan for replaceable blades and spares; track blade wear cycles on abrasive loads.
- Run a sample test (small batch) to measure power draw, heating, wrapping and final particle quality — adjust rotor speed, gap, and knife geometry accordingly.
- Consult manufacturer with feed sample — they can recommend blade alloy, tooth profile and machine class.
회사 소개
성중 is a professional plastic shredder & crusher manufacturer. We are glad to advise you on the selection of plastic crushing equipment. Welcome to tell us the exact plastics and their form (e.g., “500 kg/day of mixed PET bottles and HDPE caps, with ~10% glass-filled ABS”), and we’ll recommend a specific blade material, tooth profile, rotor speed range and machine class (single-shaft shredder / twin-shaft / four-shaft / crusher) for that feed.
